Our Services

Sewer Pumps

Sewer Pump Installation, Repairs & Emergency Fault Finding

Sewer pump stopped working, tripping the power or causing a high-level alarm?

Need help with a failed sewage pump, blocked pump station or an urgent wastewater system fault?

We provide complete sewer pump installation, repair and fault-finding services for residential, commercial and industrial properties.

From pump removal and replacement through to electrical fault finding, control panels, floats, level controls, alarms and commissioning, we can assess the complete system and get it operating correctly again.

For urgent failures, we can also respond to sewer pump emergencies to help minimise the risk of overflows, property damage and disruption.

Complete Sewer Pump Services

Sewer and wastewater pump systems need to operate reliably, often with very little warning before a fault becomes an urgent problem.

We can assist with:

Sewer pump installation
Sewage pump removal and replacement
Pump station fault finding
Pumps that will not start
Pumps continually tripping or faulting
High-level alarms
Failed float switches
Level control faults

Electrical faults and damaged cabling
Pump control panel repairs
Contactors, overloads and motor protection
Single and dual-pump systems
Duty and standby pump controls
Pump alarms and monitoring
Control panel upgrades
Testing and commissioning

We assess the pump, electrical supply, controls and level system together to identify the actual cause of the problem before recommending repairs or replacement.

Sewer pump not working?

Emergency Sewer Pump Repairs

A failed sewer pump can quickly become more than an inconvenience.

If wastewater levels continue to rise, a pump failure can result in:

When a sewer pump system fails unexpectedly, we can provide an urgent fault-finding and repair service to determine what has gone wrong and, where possible, restore operation as quickly as practical.

Our emergency response may include:

If the pump cannot be repaired immediately, we can help determine the best course of action to reduce the risk of further problems until permanent repairs can be completed.

Have an urgent sewer pump fault? Call Us as soon as the problem is identified.

Why Choose Us for Sewer Pump Work?

Sewer pump systems combine mechanical equipment, electrical motors, level controls, protection devices and control panels.

A fault in any one of these areas can stop the entire system from operating.

Our experience with pumps and electrical control systems, combined with being qualified electricians, means we can assess the complete installation rather than looking at only one part of the problem.

Experienced With Pumps

We regularly work with pump systems across residential, commercial, rural and industrial applications.

Our pump experience includes:

This practical experience helps us diagnose faults, select suitable replacement equipment and ensure the pump is being used correctly for the application.

Qualified Electricians

We are qualified electricians as well as experienced pump technicians.

This is particularly important with sewer pump systems because many faults that appear to be pump failures are actually caused by electrical or control problems.

We can test and work on:

Having one contractor who understands both the pump and electrical system can make fault finding faster and reduce the need to coordinate multiple trades.

Sewer Pump Fault Finding

A sewer pump that has stopped working does not always need to be replaced.

Common faults can include:

Failed float switches
Pumps blocked by foreign material
Motor faults
Damaged electrical cables
Failed contactors
Tripped overloads
Control panel faults

Incorrect level settings
Failed relays
Electrical supply problems
Pump protection faults
Mechanical pump damage
Problems with duty and standby operation

We test the system to determine whether the fault is with the pump, electrical supply, cabling, controls or level system.

Where practical, we aim to identify the cause before recommending replacement equipment.

High-level alarm or pump fault?

Sewer Pump Removal & Replacement

When a sewer pump has failed beyond repair, we can remove the existing pump and install a suitable replacement.

Before simply replacing the pump with the same model, we can assess whether the existing equipment is suitable for the installation.

We consider factors including:

Where possible, we can select replacement equipment that integrates with the existing system while providing reliable operation for the intended application.

A replacement job may also include:

Need a replacement sewer pump? Contact us for advice and a quote.

New Sewer Pump Installations

We can also assist with new sewer and wastewater pumping systems.

A new installation may include:

Pump sizing and selection
Sewer pump supply and installation
Single or dual-pump arrangements
Electrical supply and connections
Pump control panels
Duty and standby controls

For larger projects, we are happy to work alongside plumbers, builders, hydraulic contractors and other trades to ensure the pumping and electrical systems operate together correctly.

Already have your own plumber or hydraulic contractor?

No problem. We can complete the pump, electrical and control work required as part of the installation.

Single & Dual Sewer Pump Systems

Depending on the application, a sewer pump station may use either a single pump or a dual-pump arrangement.

Dual-pump systems can provide additional reliability by allowing the pumps to operate as:

If one pump fails, the second pump may be able to continue operating and reduce the risk of the station overflowing.

We can fault find, repair and upgrade dual-pump control systems, including:

Float Switches, Level Controls & Alarms

Reliable level control is essential for sewer pump operation.

A pump may be in perfectly good condition but still fail to operate correctly if a float switch, level sensor or control circuit has failed.

We can install and repair:

Pump start floats
Pump stop floats
High-level alarm floats
Level transducers
Level controllers
High-level alarms
Audible and visual alarms
Remote alarm outputs

Correctly installed and tested level controls help prevent pumps from running dry, excessive cycling and wastewater levels rising too high within the pump station.

Sewer Pump Control Panel Repairs & Upgrades

The control panel is the centre of a sewer pump system.

We can fault find and repair pump control panels and upgrade ageing or unreliable equipment where required.

Where older control equipment is becoming unreliable or difficult to replace, we can discuss options for upgrading the system while retaining suitable existing equipment where practical.

Testing & Commissioning

After repairs or installation, we test the system to confirm that the pump and controls are operating correctly.

Depending on the system, testing may include:

This allows us to confirm that the complete system is functioning as intended before the work is completed.

Residential, Commercial & Industrial Sewer Pumps

We work on sewer and wastewater pump systems used in a range of applications, including:

Whether the system contains a small single pump or a larger dual-pump station, we can assist with the pump, electrical and control components.

Need Help With a Sewer Pump?

Whether you have an urgent pump failure, a high-level alarm, a faulty control panel or need a complete replacement system, we can help.

With experience in pump systems and electrical fault finding, we can assess the entire installation and provide a practical solution based on what the system actually requires.

Talk to Us About Your Sewer Pump

Call Now

Have a sewer pump failure or high-level alarm? Contact us for urgent assistance.

Request a Quote

Planning a new installation, pump replacement or control panel upgrade? Send through the details of the system for a quote.

Book a Sewer Pump Inspection

Having ongoing faults or unreliable operation? Book an inspection so we can test the pump, electrical supply and control system and identify the problem.